Relay main product technical parameters
Release Time：
2022-10-20 17:09
Source：
① Rated working voltage: refers to the voltage required by the coil when the relay is working normally. It can be AC voltage or DC voltage depending on the type of relay.
② DC resistance: refers to the DC resistance of the coil in the relay, which can be measured by a multimeter.
③ Suction current: It refers to the minimum current that the relay can produce the suction action. In normal use, the given current must be slightly greater than the draw current for the relay to work steadily. The working voltage added to the coil, generally do not exceed 1.5 times of the rated working voltage, otherwise it will produce a large current and burn the coil.
④ Release current: refers to the maximum current generated by the relay to release action. When the current in the suction state of the relay decreases to a certain degree, the relay will return to the unenergized release state, and the current at this time is far less than the suction current.
⑤ Contact switching voltage and current: refers to the voltage and current allowed by the relay to load. It determines the size of the voltage and current that the relay can control, which can not be exceeded when used, otherwise it is easy to damage the contact of the relay.
Related News
2021-09-15
The use of relays in our home is very important, which can provide the most basic life guarantee for home life. However, we should also pay attention to the use of relays to avoid unnecessary troubles. Then what is the function and principle of relay, and the correct use of relay, do you understand? Now let's find out.
2021-09-15
Relay is a kind of electric control device, is when the change of the input quantity to meet the specified requirements, in the electrical output circuit to make the controlled quantity of a predetermined step change of an electrical appliance.
2021-09-15
The new relay refers to the electromagnetic relay developed and produced in order to meet the new special requirements and meet the use under special environmental conditions. Its main characteristics are small volume, light weight, vibration resistance, shock resistance, load range from low level load to 5A, 28V rated load, and the product has reliability index (failure rate level) requirements. The product adopts resistance fusion welding or laser fusion welding sealing air-tight sealing structure, mainly used in electronic control equipment signal transmission and weak current power switching.
2021-09-15
The impact of environment on the reliability of relays: the average time between failures of relays working in GB and SF is the highest, reaching 820000 hours, while in NU environment, it is only 60000hours.
2021-09-15
There are many types of relays, which can be divided into voltage relay, current relay, time relay, speed relay and pressure relay according to the input quantity, electromagnetic relay, induction relay, electric relay and electronic relay according to the working principle, and control relay and protection relay according to the purpose. According to the input quantity change form can be divided into whether there is a relay and measuring relay.
2021-09-15
The relay coil is represented in the circuit by a long box symbol, and if the relay has two coils, two long boxes are drawn side by side. At the same time, mark the relay word symbol "J" in or beside the long box. There are two ways to represent the contacts of relays: one is to draw them directly on one side of the long box, which is more intuitive.
