Types of new relays
Release Time:
2022-10-26 15:20
Source:
The new relay refers to the electromagnetic relay developed and produced in order to meet the new special requirements and meet the use under special environmental conditions. Its main characteristics are small volume, light weight, vibration resistance, shock resistance, load range from low level load to 5A, 28V rated load, and the product has reliability index (failure rate level) requirements. The product adopts resistance fusion welding or laser fusion welding sealing air-tight sealing structure, mainly used in electronic control equipment signal transmission and weak current power switching.
New electromagnetic relays include: non - magnetic holding relay and magnetic holding relay. Non-magnetic holding relay is a monostable relay. The output state of the contact of the relay coil changes under the action of the specified voltage excitation, but the output state of the contact recovers to the initial state after the coil excitation is withdrawn. Magnetic retention relay is a kind of bistable relay with single coil structure and double coil structure. The coil excitation is electric pulse mode. For the relay with single coil structure, when the coil changes its contact output state under the action of the specified voltage excitation, the contact can maintain the existing state after the coil excitation is withdrawn. To change the output state of the contact, a specified reverse voltage excitation should be added to the coil. For relay with double coil structure, when the first coil changes its contact output state under the action of the specified voltage excitation, the contact can maintain the existing state after the coil excitation is withdrawn. To change the contact output state, it is necessary to add the specified voltage excitation to the second coil.
Because of the special performance of the new relay, its detection methods and requirements are different from those of conventional relays. The main detection contents include electrical parameter detection, electrical performance index detection, mechanical performance index detection and physical performance index detection.
Related News
2021-09-15
The use of relays in our home is very important, which can provide the most basic life guarantee for home life. However, we should also pay attention to the use of relays to avoid unnecessary troubles. Then what is the function and principle of relay, and the correct use of relay, do you understand? Now let's find out.
2021-09-15
Relay is a kind of electric control device, is when the change of the input quantity to meet the specified requirements, in the electrical output circuit to make the controlled quantity of a predetermined step change of an electrical appliance.
2021-09-15
The impact of environment on the reliability of relays: the average time between failures of relays working in GB and SF is the highest, reaching 820000 hours, while in NU environment, it is only 60000hours.
2021-09-15
There are many types of relays, which can be divided into voltage relay, current relay, time relay, speed relay and pressure relay according to the input quantity, electromagnetic relay, induction relay, electric relay and electronic relay according to the working principle, and control relay and protection relay according to the purpose. According to the input quantity change form can be divided into whether there is a relay and measuring relay.
2021-09-15
The relay coil is represented in the circuit by a long box symbol, and if the relay has two coils, two long boxes are drawn side by side. At the same time, mark the relay word symbol "J" in or beside the long box. There are two ways to represent the contacts of relays: one is to draw them directly on one side of the long box, which is more intuitive.
2021-09-15
Measure contact resistance: use the electric barrier of a multimeter to measure the resistance of normally closed contact and moving point, and the resistance value should be 0; The resistance of normally open contact and moving point is infinite. So you can tell that one is a normally closed contact and that one is a normally open contact.